If your panel will not power on, please try these steps:
1) Verify the panel is plugged into a known working outlet
2) Check to see if there are any LED lights on anywhere on the panel
3) Try a different power cable
4) Make sure the rocker switch is on the ON position
5) Make sure the power cable is connected securely to the AC power inlet on the side of the panel and
to the power outlet.
Related Articles
Holiday / Vacation Care
If you are not planning on using the G2 slim panel for a prolonged time, please make sure to unplug the power cable from the panel to prevent any possible hazards to electronics. Such as a lightning strike that could cause a power supply ripple. We ...
Cleaning the Screen
Before doing any maintenance, please unplug the power of the panel to prevent electric shock Cleaning the Screen When cleaning the screen, avoid using chemical reagent. Solvents may damage the enclosure. If there are marks that are not coming off ...
G2 board entirely freezes on the Android side and becomes unresponsive
The G2 board entirely freezes on the Android side and becomes unresponsive. Once the board freezes, the only way to fix the issue is to turn off the power switch on the side of the board. The main circular power button on the front of the board does ...
Cleaning the IR Tube
Before doing any maintenance, please unplug the power of the panel to prevent electric shock When cleaning the IR tube, please use a dry, soft, micro-fiber towel and wipe all the way around the outside of the screen. This is where the IR tube is ...
Product Care
Before doing any maintenance, please unplug the power of the panel to prevent electric shock Please do not frequently switch the product on and off, doing so may shorten the product service life. After the screen is switched off, please wait for a ...