G2 Panel RS232 Protocol Setting

• Related Articles

• G2 SLIM Setting the Boot Channel (Android, OPS, Etc)

  By default, the G2 SLIM will boot to the Android screen.  If you would like the panel could be set to boot directly to the OPS; follow these instructions to set the panel to open the OPS:  Note, these instructions will also work for any other inputs ...

• Sound troubleshooting - is it the panel?

  Sometimes the sound from a computer application is muted, volume levels on the computer are low, volume on the computer is not assigned to the LED panel, or a cable is unplugged.  There are a myriad of things that may cause someone to report "No ...

• Recalibrate the touch on the panel.

  Overview When touch is inaccurate or not working on your G2 Slim interactive flat panel, it needs to be configured or calibrated. The following instructions are on how to configure and calibrate your interactive flat panel. Important: The interactive ...

• G2 Panel – Touch Control Not Working

  Product(s):  G2 SLIM Panel Customer said the touch on the panel was not working on the Android system.  Customer also said the touch was not working when a computer with a known good USB cable was plugged in. Possible Resolution: Locate the remote ...

• Sound is Only Coming Out of 1 Speaker on the Panel

  On the panel's sidebar (that allows you to switch to OPS, input, Android, etc.) there is a option that looks like 3 lines (the 4th option from the top). Make sure the volume's balance option is right in the middle at 50 and that will make it to where ...