G2 SLIM Setting the Boot Channel (Android, OPS, Etc)

By default, the G2 SLIM will boot to the Android screen.  If you would like the panel could be set to boot directly to the OPS; follow these instructions to set the panel to open the OPS:  Note, these instructions will also work for any other inputs on the panel.

1.    Press the Home icon on the panel.

2.    Press the Apps icon.

3.    Press the Settings icon.

4.    Press System.

5.    Press Device Settings.

6.    Press Starting Channel

 7.    Select OPS

Note: If using an external computer, select the appropriate input.

 

• Related Articles

• G2 Panel RS232 Protocol Setting

  Please see attached documents for G2 SLIM, RS232 protocol settings.

• Distorted Video on Android

  The panel is a very large android device which by design are mobile devices.  On my 75 SLIM in my shop, when I pull up YouTube, the URL will read m.youtube.com meaning the web site checks the type of device the redirects the device to the mobile web ...

• G2 board entirely freezes on the Android side and becomes unresponsive

  The G2 board entirely freezes on the Android side and becomes unresponsive. Once the board freezes, the only way to fix the issue is to turn off the power switch on the side of the board.  The main circular power button on the front of the board does ...

• Sound is Only Coming Out of 1 Speaker on the Panel

  On the panel's sidebar (that allows you to switch to OPS, input, Android, etc.) there is a option that looks like 3 lines (the 4th option from the top). Make sure the volume's balance option is right in the middle at 50 and that will make it to where ...

• G2 Panel – Touch Control Not Working

  Product(s):  G2 SLIM Panel Customer said the touch on the panel was not working on the Android system.  Customer also said the touch was not working when a computer with a known good USB cable was plugged in. Possible Resolution: Locate the remote ...